LG Vertical Summit

The LG Vertical Summit is a hybrid IP PBX which offers a roboust digital and VoIP solution.

We need to first setup our SIP Data/SIP CO Attributes (PGM133) on CO Range (5-8) for correct communication with our trunks.










Then we will select CO Line Data/VoIP Attributes (PGM142) and our CO range will be (5-8).  Setting the CO VoIP Mode to SIP & RTP-Packet-Relay.


We will then look at the SIP Data/SIP Common Attributes (PGM210) and make changes in these areas;







Now we can setup the SIP trunk user ID settings by entering user index 1. SIP Data/SIP User ID Attributes (PGM126)





Finally be sure you have placed all correct network settings in the System IP Plan.

System ID & Numbering Plan/System IP Plan (PGM102)





  • 109 Users Found This Useful
Was this answer helpful?

Related Articles

Nortel/Avaya BCM 450 and BCM50 R6

NortelBCM   To configure the Nortel BCM you must have VOIP Trunk or SIP Trunk keycodes. The...

FreeSwitch

FreeSwitch Configuration Termination You may need to add from domain param set to icttech.net...

3CX Phone System

3CX Phone System for Windows Version 9. 3CX Phone System is a software-based IP PBX that...

Asterisk

Asterisk is a telephone private branch exchange (PBX), created in 1999 as open software for Linux...

Asterisk IAX2

iax.conf [general] register => 100000:johnspassword@atlanta.icttech.net:4569...