Yealink SIP-T28P

Configuration Details

Get the IP Address

  • Press the OK button
  • The IP Address should appear on screen

Web Management

  • Open your web browser and go to http://<ipaddress>
  • Login to web management (Default User : admin, default Password : admin)

Account Settings

  • Go to Account tab
  • Chose one account
  • Fill in the following values:
    • Account Active: On
    • Label: 100000 (your username)
    • Display Name: John Smith (your name)
    • Register Name: 100000 (your username)
    • User Name: 100000 (your username)
    • Password: ********* (account password)
    • SIP Server: (one of our multiple servers)


  • Subscribe Period: 300

300 is also to be used for Login Expire(seconds), to be changed from 3600

Yealink account settings


  • Click on Confirm button to save your settings.

Preventing Direct IP Scanner Calls from 100

Please make sure you have the latest firmware upgrade and look for and Enable the setting "Accept SIP Trust Server Only" which is at the bottom of the Advanced Tab under Account.

The newer firmware also has an option in the General Settings called "Allow IP Call", please set this to "Disabled".

  • IP Phone, VoIP Device, Yealink, T28P
  • 240 Users Found This Useful
Was this answer helpful?

Related Articles

Cisco SPA112

Make sure to install the latest firmware from Cisco Software. Version 1.3 or later should be...

Dial Plan for Linksys ATAs

The basic dial plan provided in the configuration samples for the Linksys ATA devices (like PAP2,...

Cisco PAP2

Configuration Details Step 1 The first step is to find out what IP Address your adapter is...

Cisco/Linksys Star Codes

The Cisco/Linksys ATA devices come with In-Built star codes that activate certain features on...

Cisco PAP2T

If you are running the PAP2t with a tomato firmware router, this may represent a persistent...